Description

Products You May Like

• Pyrography Workshop with Sue Walters - DVD

  $24.95 $14.97 0 review(s)

  
  

  Discover the simple techniques of pyrography as you stand alongside one of today's finest woodburning artists, Sue Walters. Ideal for the beginner, or for any woodburners looking to improve their skills, Pyrography Workshop with Sue Walters is like having a private tutoring session. In addition to learning all of the basics of woodburning, you also will receive 10 detailed lessons that culminate in the completion of a stunning hawk project. Inside this 2-DVD set, you will find a 16 page color booklet that includes two patterns for the hawk project, a photo of the finished piece, and an invaluable set of reference photos illustrating more than 60 textures created with just four pyrography tips. Pyrography Workshop with Sue Walters has everything you need to start woodburning like a pro!

• BUILDING DOORS - DVD

  $19.95 $11.97 0 review(s)

  
  

  No matter what kind of cabinet you're building, it's the doors that get most of the attention. Everyone can see the doors -- so you want them to be attractive. And everyone will interact with them, too -- so you want them to be sturdy and functional. In this new DVD on Building Doors, master woodworker Andy Rae shows you how to build all kinds of doors -- each with its own unique style and functionality -- depending on how you plan to use a particular cabinet. Because each type of door is built for its own specific application, it requires slightly different skills, techniques and procedures. And they're all demonstrated here -- with clear, close-up shots of every detail, step-by-step instructions and lots of inside tips from a real pro. Here are some of the topics you'll learn about in this comprehensive DVD. Design variations First build the cabinet Sizing the doors to the case Creating door joints Making breadboard doors, frame-and-panel doors, cope-and-stick doors, and simple glass doors Smoothing a door Choosing hinges Hanging a door Handles, pulls, latches, catches and stops Whether you're a trim carpenter or a weekend woodworker interested in building your skills, this valuable DVD will give you all the advice you need to create any kind of cabinet door.

• ROUTER DRAWER BASICS VW-0202 - DVD

  $24.95 $14.97 0 review(s)

  
  

  Learn in this video to make drawer side with a number of set ups using the portable router and the router table. Includes various joining techniques i.e. glue lock, rabbet, lock corner, dovetail, etc. Cliffe includes information on beading which helps the appearance of the fit of the drawer. Learn to set up the router table for accurate and efficient routing of all drawer parts.

• HANDPLANE BASICS: A BETTER WAY TO USE BENCH PLANES- DVD

  $24.95 $14.97 0 review(s)

  
  

  While bench planes are the most fundamental handplanes in your shop, they also are the most vexing. Ask two woodworkers how to choose, set up and use your bench planes and you'll get three answers. After years of historical research and practical bench experience, Editor Christopher Schwarz has found a way to simplify the convoluted bench plane system so you can think for yourself when it comes to these tools. After viewing this DVD you'll know how to select the right size plane for your work. You'll know how to sharpen and set it up so it does the job at hand. And you'll learn how to use the plane so you make perfectly flat and gleaming panels (with the minimum amount of effort). This DVD doesn't simply spout off a new idiosyncratic way to work with bench planes. Instead Schwarz explains how all the systems work so you can immediately see their strengths and weaknesses and exploit them so you'll do better work. "Handplane Basics" puts into practice all of the principles explained in the story "Bench Planes: The System of Three" in this issue of Woodworking Magazine and dives further into the topics of sharpening, setup and use. If you are confused or frustrated by your bench planes, this DVD is just the ticket.

• FWW: VIDEO WORKSHOP SERIES #3 BOOKCASE WITH BRACKET FEET

  $29.95 $17.97 0 review(s)

  
  

  In this video workshop I?m going to show you how to build a basic bookcase and finish it with interesting, attractive details. You make the case from hardwood-veneer plywood, assembling it with screws and simple dado-and-rabbet joints. At the base, you have a choice: You can make a flat-bracket base that you cut on the tablesaw and bandsaw, or if you want the same kind of base used on period furniture, you can make an ogee bracket foot. To make this base, you cut a cove in thick stock on the tablesaw; I?ll show you how to do that. Then you shape the rest of the curved foot with planes and scrapers. Finally, you cut a decorative scroll pattern on the bandsaw. I?ll show you how that?s done; the downloadable plan includes full-size patterns for both feet. This video workshop refines bookcase designs from an article I wrote for Fine Woodworking #133; the photos above are from that article. winning woodworker and teacher Philip C. Lowe in this video workshop, building a bookcase with adjustable shelves. You'll get two options for the base. The basic case has a flat-bracket base, with simple curves cut on the bandsaw. Or, you can substitute an ogee bracket foot. Highlights include: More than 1 hour of video instruction. Useful techniques that simplify how you edge the plywood, handle large sheets of plywood, and shape moldings. Download the woodworking plan and talk to the author in the Ask the Experts forum.